Motul Fuel System

Fuel system cleaner
Additive to add to gasoline
For car engine with carburettors or injection

MOTUL FUEL SYSTEM CLEAN is designed to be used in all types of gasoline engine with injection or carburettors, naturally aspirated or turbocharged with or without catalytic converter, using all kind of gasoline. MOTUL FUEL SYSTEM CLEAN effectively cleans dirtying and clogging which appear in the whole fuel system :

• condensation in the fuel system
• gumming in the carburettor
• injector nozzle fouling
• dirtying of combustion chambers and inlet valves

MOTUL FUEL SYSTEM CLEAN provides a perfect lubrication during cleaning process and prevents removed micro-particles from depositing.

PERFORMANCE
A clean fuel system is a necessary condition for an effective engine running. MOTUL FUEL SYSTEM CLEAN allows to :

• clean the carburettors or the injectors (for a better atomisation)
• prevent the formation of deposits and varnishes on inlet valves and in combustion chambers
• disperse condensation water in order to avoid any fuel system oxidation

A regular use will provide :

• optimum engine performances
• fuel savings
• increased lifetime of fuel system and catalytic converter
• a reduction of exhaust pollutants emissions

RECOMMENDATIONS
Directly pour one can of FUEL SYSTEM CLEAN in the tank before refuelling, regularly, depending on the use (shorten intervals in urban use). The fuel system will be then completely cleaned, from the tank to the combustion chamber. A can of FUEL SYTEM CLEAN is sufficient for tank capacity up to 60 litres. In case of bigger tank capacity, the recommended mixing ratio is 0.50% (200:1). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.

Curative treatment : use the product pure by plugging on the fuel system with the adaptation kit.

Motul Engine Clean

Engine cleaner
Additive to add to engine oil before drain
For gasoline and Diesel car engine

MOTUL ENGINE CLEAN is designed to be used in all types of Diesel and gasoline engines with injection or carburettor(s), with or without catalytic converter, using all kind of fuel.. MOTUL ENGINE CLEAN effectively cleans dirtying and clogging which appear in the engine. The removed micro-particles are then evacuated at the time of the oil drain. MOTUL ENGINE CLEAN provides a perfect lubrication during cleaning process.

PERFORMANCE
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to :

• lower the wear
• decrease oil and fuel consumption
• increase compressions on the same way on all the cylinders
• decrease exhaust pollutants emissions
• evacuate deposits, varnishes and other combustion residues from problem areas such as hydraulics
• lifters or piston grooves and rings
• take advantage of fresh oil which will fill engine after draining
• increase catalytic converter’s lifetime

RECOMMENDATIONS
Before each oil drain, add, in the engine, a can of ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the filter.

The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per supplementary litre of engine oil (over 5 litres) . Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.

Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very appreciable reduction of pollutants emissions to pass Vehicle Inspection.