Pulling the helmet off a crash victim can, in seconds, cause further trauma to the neck and cervical spine resulting in serious debilitating, and permanent damage. The Eject Helmet Removal System was designed to aid in the safer removal of a helmet by pushing the helmet off the head after the upper spine has been immobilized.

Essentially, the Eject system is an airbag that is inflated either by hand or by a CO2 cartridge when an EMT gets to you after an impact. The device is installed in your helmet. Once installed you essentially forget about it until the dark day when you have an impact that threatens your spinal cord. The EMT will attach his/her inflator bulb or CO2 cartridge to the valve hanging out of the back of your helmet and pump up the bag, lifting the helmet off your head without any strain on your neck. Because it lifts off the top of your head, the chance of further injury is drastically reduced.

Video Spot on Speed channel describing the Eject:

The PUMA Trionfo suit is the new top of the range PUMA suit and establishes a new technological standard used by champions on a world-wide basis today. Utilizing revolutionary and proprietary advancements in material, form, function and design, the PUMA Trionfo synthesizes the ultimate drivers environment for performance and endurance. Lightweight and breathable shiny satin Nomex III material in a unique 3-layer design offers unmatched weight reduction, superior transpiration, higher thermal protection, and increased durabilty over other 3-layer lightweight designs. Anatomically correct pre-shaped body creates less bulk in the driving position, increases freedom of movement and agility, along with pre-shape sleeves and legs reducing drivers fatigue of both the arms and legs.

The Full Movement System (FMS), fully gusseted arm articulation in stretch Nomex, increases the necessary freedom of arm movement compliant with any cockpit/seat environment. Superior driver comfort through forward side seam positioning with internal flat serge seam construction and internal pockets avoiding contact with the seat and relieves un-wanted pressure points. Strategically placed knit Nomex stretch panlels located at the knees, calves, and kidney/lumbar areas improve both mobility and transpiration. Super flat epaulette design for the ultimate HANS compatibility, soft knit internal collar with satin outer stops migration under the Hans chest plate allowing safe and comfortable usage of the Hans device.

PUMA's Pro-Fit Cat glove (short) represents all of the latest technology available for the Motorsport professional. Built to meet the new strict SFI3.3/5 regulations and surpasses the current FIA 8856-2000 specifications, this glove is certified for World competition. The Pro-fit Cat glove features a fully encompassing sculptured barrier of 180gram knit Nomex covering both the back of the hand and through out the interior of the hand, fingers, and palm. Utilizing sculptured pre-formed finger construction provides precise fitment and relaxed grip, while strategically positioned Pittards Digital fireproof tactile pads provide hardwearing and maximum grip within the palm area. FIA 8856-2000 and SFI 3.3/5 approved. Available in red, blue, and black. Sizes: 8-12.

The PUMA Trionfo Mid Pro II is the most technologically advanced racing shoe ever produced for the professional driver, key advancements in light-weight materials results in the lightest racing shoe available today. The body of the Trionfo is constructed of Schoeller canvas, soft suede, and Nomex lining offering superior transpiration, weight reduction, and increased fire protection (TPP40). Asymmetrical lacing improves blood circulation, decreases lactic acid build-up (muscle fatigue), and improves heat dissipation within the foot.

A "tongue-less" body design reduces weight while improving conformation to shape and movement of the driver's foot. A Carbon Fiber heel stabilizer provides centricity for the necessary heel-toe movement combined with a split heel design reduces weight, heat transfer, and vibration.

Available in red, blue, and black. Sizes: 39-47.

The Cool Shirt system is a very unique idea, and offers relief from one of the oldest problems in motorsports - heat.

We've all been there, a sweltering August afternoon with pending thunderstorms and you're out on track clicking off hotlaps. Before you know it, in car temperatures start to climb up to dangerous levels - we're talking beyond a little sweat - into heat exhaustion.

This system feeds cold water through tubes sewn onto a shirt worn underneath your race suit. The heat from your body is dissipated to the water and drawn away from your body - and you don't have to do a thing. Being cooler helps you make better decisions and think faster. Being comfortable really does make you faster.

This kit comes with a leak proof cooler, 8' water hose with quick disconnect fittings. Shirts are sold separately. The cooler is 12 quarts which should last you for around 3 hours of track time. We recommend the temperature control switch which allows you to increase the water flow from a dash-mounted control plate. Also the mounting plate gives you a great place to securely strap down the cooler after you've refilled it.

It is a necessity that you choose a fireproof option if you are competing in real racing. These options include the firewear, nomex or Carbon-X options listed below. Otherwise you will not meet fire regulations at your scrutineering stop.

100% CarbonX Balaclava anatomically engineered for maximum comfort. Double layer construction.

SFI Approved

100% CarbonX short sleeved shirt base layer with anatomically engineered patterns to maximize comfort. Features a tapered bicep and seamless shoulder.

FIA and SFI approved.

100% CarbonX Long sleeved shirt base layer with anatomically engineered patterns to maximize comfort. Features a tapered wrist closure for secure fit.

FIA and SFI approved.

100% CarbonX boxer short base layer with anatomically engineered patterns to maximize comfort. Features a tapered thigh closure for secure fit.

FIA and SFI approved.

100% CarbonX Long pant base layer with anatomically engineered patterns to maximize comfort. Features a tapered ankle closure for secure fit.

FIA and SFI approved.

Crew length sock with CarbonX shielding, breathable mesh under fuoot and Oakley logo.

Size Small for foot size 7-9, Size Large for size 10-13.

These socks are currently unavailable. Check back to see when they become available.

The Molecule Labs Wash Kit includes everything you need to wash your nomex race gear after an event. There is nothing like knowing that the next time you go to climb in your suit, it won't be a sweaty mess. Don't forget - your helmet has Nomex in it... you can use this to keep from getting that "soggy helmet stink."

Also available is the Trial Wash Kit. This includes 4oz versions of the same products so you can test it out. Perfect for those of you that aren't yet convinced.

MOLECULE™ WASH - 16 oz Pour Bottle

Effectively cleans Nomex™ fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors.

• Concentrated formula effectively cleans technical fabrics in standard washing machines
• Removes contaminants that can degrade fabric performance
• Contains an antimicrobial agent to inhibit the growth of bacterial odors
• Maintains fabric breathability
• Contains a fabric brightener to help you look your best
• Recommended for Nomex™ and other technical fabrics

MOLECULE™ SPOT CLEANER - 16 oz Trigger Spray Bottle

Penetrates deeply into Nomex™ fabric to dissolve and suspend tough spots and stains that can create combustible hot spots.

• Concentrated formula penetrates deeply to safely dissolve embedded spots and stains
• Part of the Molecule™ Technical Fabric Care System
• For use with Molecule™ Wash

MOLECULE™ REFRESHER - 4 oz Pump Spray Bottle

Reduces odors on all types of technical fabrics

• Contains an antimicrobial agent to inhibit the growth of bacterial odors
• Maintains fabric breathability
• Cosmetic-grade, skin-friendly ingredients
• Light fresh scent
• Recommended for Nomex™ and other technical fabrics

The Care Kit takes all the great products from Molecule Labs and puts them together into one big package - perfect for the first time buyer.

• MOLECULE™ PROTECTOR 16 oz Trigger Spray Bottle
• MOLECULE™ WASH 16 oz Trigger Spray Bottle
• MOLECULE™ REFRESHER 16 oz Trigger Spray Bottle
• MOLECULE™ SPOT CLEANER 4 oz Pump Spray Bottle
• MOLECULE™ REPELLENCY TESTER 1/2 oz Dropper
• MEASURING CUP 4 oz