The Billet aluminum hats with Brembo "Float" bushings allow the disc to seek its true centerline for consistent braking performance. Floating Disc design reduces heat and stress transfer to wheel bearings and hubs and greatly reduces unsprung weight (up to 18 pounds per corner) for better handling, quicker response and better acceleration. High performance brake pads included with the kit are suited for high end street use as well as limited track application.

The calipers come in black only, unless you are willing to pay an extra custom painting charge. Call us for details on this. These kits work with the standard master cylinder and do not affect the ABS!!

Each Two piece kit includes the following:

• Cross drilled and vented motorsport discs
• Billet aluminum floating hats with McLaren springs
• High performance brake pads
• DOT/TUV approved stainless steel braided brake lines made by Goodrigde.
• Aircraft quality mounting brackets and hardware
• Easy to follow installation guide

Also available for the Z3, the one piece kits are the same as the two piece kit, but they come with a single piece rotor. This is a more economical option than the 2 piece kits. However, that does not mean that these kits can't perform. These rotors are cross drilled and directionally vented to increase airflow through the disc and continue to stop your car time after time under the most strenuous conditions.

There are no rear applications for the Z3.

Please note that the 320x28mm (pn xxx.6001) kit requires a slight modification on Non-M Cars. It entails shaving of the steering knuckle for proper fitment and clearance of the larger rotor. This is not difficult to do, but the kit will not fit without this modification.

For MZ3's, the 7004 kit requires this same modification.

The Billet aluminum hats with Brembo "Float" bushings allow the disc to seek its true centerline for consistent braking performance. Floating Disc design reduces heat and stress transfer to wheel bearings and hubs and greatly reduces unsprung weight (up to 18 pounds per corner) for better handling, quicker response and better acceleration. High performance brake pads included with the kit are suited for high end street use as well as limited track application.

The calipers come in black only, unless you are willing to pay an extra custom painting charge. Call us for details on this. These kits work with the standard master cylinder and do not affect the ABS!!

Each Two piece kit includes the following:

• Cross drilled and vented motorsport discs
• Billet aluminum floating hats with McLaren springs
• High performance brake pads
• DOT/TUV approved stainless steel braided brake lines made by Goodrigde.
• Aircraft quality mounting brackets and hardware
• Easy to follow installation guide