Arai GP-6 (PED)


Simply put, it’s hard to imagine a better racing helmet. Combine Arai’s proprietary, groundbreaking PBcLc (Peripherally Belted Complex Laminate) shell construction -- the same shell shape as the F-1-grid’s GP-6RC model; a wider eye port for optimized peripheral vision; new ventilation; and on and on – and you get the striking new Arai GP-6(PED). The new shell gives you incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is. The cheek pads are replaceable for a more personal fit. Up top, the ventilation system is greatly improved with three larger, closeable intake vents, plus two larger exhaust cowls.

    POSITIVE SHIELD LATCH - Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.

    WIDER EYEPORT - Wider eye port for increased peripheral field of view, when compared to the previous GP-5 series.

    BUILT IN FHR NUT - Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations.

    E-JECT READY CRWON PAD - Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.

    NEW SHIELD PIVOT HARDWARE - New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6PED.

    VENTILATION - Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.

    NEW CHINBAR - Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity. Rise in shell above the shoulders for added clearance.

  • Material:

    • Arai's exclusive, very-lightweight ScLc shell technology (Super Complex Laminate Construction)


    • Snell 2015
    • FIA 8859-2015

Please Note:

This product is not available for order online. Please call for special order status.