Porsche GT3 Belts


Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you need to replace them because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier.

They are available with Standard 3" shoulders or HANS specific 2"/3" in the colors shown below. Available with Pull-Down lap belts only.

These belts will expire at the end of 2022.

  • Components

    • Shoulders: Pull Down 2"/3" or 3"
    • Laps: Pull Down 2"
    • Subs: Pull Up 2"

    End Fittings

    • Shoulder: LV7 (3" Shoulders) or LV10 (HANS Specific 2"/3" Shoulders)
    • Lap: Sewn-in B43A (GT3 Specific Hardware)
    • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

    Cam Lock Fixed Point

    Anti-Sub Strap

    Included Hardware

    • (2) SG23 7/16" Eyebolts
    • (2) SG39 7/16 Backing Plates
    • (4) S3 Wavy Washer

    Homologation

    • Expires end of 2022
  • Specifications

    Components

    • Shoulders: Pull Down 2"/3" or 3"
    • Laps: Pull Down 2"
    • Subs: Pull Up 2"

    End Fittings

    • Shoulder: LV7 (3" Shoulders) or LV10 (HANS Specific 2"/3" Shoulders)
    • Lap: Sewn-in B43A (GT3 Specific Hardware)
    • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

    Cam Lock Fixed Point

    Anti-Sub Strap

    Included Hardware

    • (2) SG23 7/16" Eyebolts
    • (2) SG39 7/16 Backing Plates
    • (4) S3 Wavy Washer

    Homologation

    • Expires end of 2022

Please Note:

This product is not available for order online. Please call for special order status.