FREE SHIPPING ON MOST ORDERS OVER $100!

Porsche GT3 Belts

Components

  • Shoulders: Pull Down 2"/3" or 3"
  • Laps: Pull Down 2"
  • Subs: Pull Up 2"

End Fittings

  • Shoulder: LV7 (3" Shoulders) or LV10 (HANS Specific 2"/3" Shoulders)
  • Lap: Sewn-in B43A (GT3 Specific Hardware)
  • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

Cam Lock Fixed Point

Anti-Sub Strap

Included Hardware

  • (2) SG23 7/16" Eyebolts
  • (2) SG39 7/16 Backing Plates
  • (4) S3 Wavy Washer

Homologation

  • Expires end of 2022

Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you need to replace them because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier.

They are available with Standard 3" shoulders or HANS specific 2"/3" in the colors shown below. Available with Pull-Down lap belts only.

These belts will expire at the end of 2022.

Part Shoulder Belt Type Color Price Purchase
SR 91128-0 Standard 3-Inch Black $479.00
SR 91128-2 Standard 3-Inch Red $479.00
SR 91128A-0 2-Inch / 3-Inch HANS Specific Black $549.00
SR 91128A-2 2-Inch / 3-Inch HANS Specific Red $549.00

Porsche Belt for Carbon Seats

Components

  • Shoulders: Pull Down 2"
  • Laps: Pull Down 2" "Zip Adjuster"

End Fittings

  • Shoulder: LV4 (2" Shoulders) LV10 also included
  • Lap: Sewn-in B43A (GT3 Specific Hardware)

Cam Lock Fixed Point

Inboard lap belt

Included Hardware

  • (2) S82 Flat Washer
  • (2) SG29 Bolts
  • (2) S104 Spacer/Collar
  • (2) S184 Flat Washers

Homologation

  • Not FIA homologated
  • FMVSS209 Approved for use as primary restraint on USA roads

This belt fits 991 GT3, 981 GT4, and 918 cars with the factory Porsche one-piece carbon seat. It features a specific bracket for the lap belt installation that requires no drilling, and attaches to the factory engineered harness mounting locations.

This is a four point belt, which means it features SCHROTH's famous ASM technology. This technology, in conjuction with the enduro laps, keeps your pelvis planted in the seat in the event of an impact, keeping you from submarining under the lap belt. This particular belt features a street legal FE style camlock,.

Please note: this is not an FIA homologated competition restraint.

Part Color Side Price Purchase
SR 90593-0 Black Driver $479.00
SR 90593-2 Red Driver $479.00
SR 90594-0 RH Black Passenger $479.00
SR 90594-2 RH Red Passenger $479.00

Porsche GT3 Enduro 2x2

Components

  • Shoulders: Pull Down 2"
  • Laps: Pull Down 2"
  • Subs: Pull Up 2"

End Fittings

  • Shoulder: LV10 with B14 Snap-in Bracket Wrapped-in
  • Lap: Sewn-in B43A (GT3 Specific Hardware)
  • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

Cam Lock Fixed Point

Anti-Sub Strap

Included Hardware

  • (6) SG23 7/16" Eyebolts
  • (2) SG39 7/16" Backing Plates
  • (12) S3 7/16" Wavy Washer

Homologation

  • FIA 8853-2016

Success in endurance racing depends on durability, quality and speed. The Enduro-Belt is packed with features which will reduce your driver change times!

The Enduro 2x2 features Frontal Head Restraint (FHR) specific 2” Enduro shoulder belts, 2" Enduro Lap Belts, and a T-bar adjustable sub strap. All points are wrapped in, so you can use either snap or bolt in end fittings.

Schroth’s top-of-the-line racing harness uses the widely praised "ZIP Adjuster”. Integrated into the lap belt buckle attachments, “ZIP Adjusters” optimize the position of the adjusters for perfect tightening. The design of the "ZIP Adjusters" allows for exceptional ease of adjustment (tightening) and release for faster and smoother driver changes.

This version uses a 2” shoulder belt.

Part Color Price Purchase
SR 94710US-0 Black $689.00
SR 94710US-2 Red $689.00

Porsche GT3 Profi 2x2

Components

  • Shoulders: Pull Down 2"
  • Laps: Pull Down 2"
  • Subs: Pull Up 2"

End Fittings

  • Shoulder: LV10 with B14 Snap-in Bracket Wrapped-in
  • Lap: Sewn-in B43A (GT3 Specific Hardware)
  • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

Cam Lock Fixed Point

Anti-Sub Strap

Included Hardware

  • (6) SG23 7/16 Eyebolts
  • (2) SG39 Backing Plates
  • (12) S3 Wavy Washer

Homologation

  • FIA 8853-2016

Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you need to replace them because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier.

The Porsche GT3 Profi 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" sewn GT3 laps, and a adjustable T-bar sub strap.

The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfectly on a FHR device, creating optimal force distribution on the surface of the device.

Part Color Price Purchase
SR 94700US-0 Black $549.00
SR 94700US-1 Blue $549.00
SR 94700US-2 Red $549.00
SR 94700US-H3 Yellow $549.00

Porsche GT3 Profi 3x2

Components

  • Shoulders: Pull Down 3"
  • Laps: Pull Down 2"
  • Subs: No Adjust 2"

End Fittings

  • Shoulder: LV7 Wrap (3" Shoulders)
  • Lap: Sewn-in B43A (GT3 Specific Hardware)
  • Subs: LV10 with B14 Snap-in Bracket Wrapped-in

Cam Lock Fixed Point

Anti-Sub Strap

Included Hardware

  • (1) SG23 eyebolt and (2) S3 wavy washers for substrap installation
  • (2) B24 bolt in brackets, (2) LV4 2 bar slides, (2) 7/16 pivot sleeves, and (2) 7/16 flat washers for optional bolt in substrap installation
  • (2) SG10 bolts, (2) SG29 bolts, (2) wavy washers, (2) 7/16 pivot sleeves, (2) 7/16 flat washers, (4) spacers for a number of different lap belt installations

Homologation

  • FIA 8853-2016

Porsche GT3 Cup Cars come with Schroth belts direct from the factory. If you need to replace them because of an accident, or if you're putting the factory GT3 seat setup into another car, you'll want these belts.

They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier.

Available with Pull-Down lap belts and No Adjust subs only. Shoulders are 3"

Part Color Price Purchase
SR 94690-0 Black $549.00
SR 94690-2 Red $549.00