Side Mounts for fixed-back competition seats. Model R-9060 is designed for Sparco Evo seats to be bolted to 996, Boxster, 911 and 944. Model R-9061 is used for Sparco Evo-2 seat.
The dimensions (front to back) are constant between manufacturers, so this will work for cobra, sparco and recaro seats. It has been designed to match specifically the width of a Sparco's standard width and "plus-size" width seats to the width of the Porsche seat rails. Keep in mind that the width of your seat may not match the Sparco widths. in our experience it's been quite close.
These Side mounts offer a reinforced mounting location for the inboard lap belts. They are sided (passenger and driver) and are designed to adapt a "wider" seat to factory Porsche rails.
Check with your sanctioning body to see if lap belt mounting locations attached to seat side plates are legal.
This side plate was designed to adapt a Recaro Pole Position seat to Factory Mini sliders. Most other aftermarket seats will fit the holes on the side, however other seats will have a slightly different width causing the fitment of these side plates to the factory sliders to be off.
These side plates only have one rear height mounting location.
Cobra's newest universal aluminum side mount that is constructed using high-strength aluminum. These mounts are an "L" style mount for a minimum footprint in the vehicle and are designed to be as universal as possible for ease of installation. The brackets have 4 slotted locations for mounting the front seat bolt and 3 holes in the rear for mounting the rear seat bolt enabling a large range of seat rake angle adjustment. For mounting to the chassis, the bracket has 3 slots in the front and 3 slots in the rear to provide maximum adjustability and ease in mounting.
The bottom flange is 2" wide with each slot measuring 0.320" wide by 1.200" long. The bracket is 14.25" long and 5" tall. A pair of these brackets weighs 2.41 lbs.