Comfort Pads 3 Inch

One pair of 3-inch shoulder pads to be used with any 3" shoulder belt from TAKATA. Very soft and luxurious fabric on the outside, filled with foam for ultimate comfort. Extra padding protects below the shoulderbelt adjuster.

Zipper down one edge for easy installation.

Part Color Price Purchase
tr 78008-0 Black $99.00
tr 78008-H2 Green $99.00

Comfort Pads 2 Inch

One pair of 2-inch shoulder pads to be used either with factory 3 point harnesses, or 2" shoulder webbing on a Drift II. Very soft and luxurious fabric on the outside, filled with Confor foam for ultimate comfort.

Zipper down one edge for easy installation.

Part Color Price Purchase
tr 78011-0 Black $89.00
tr 78011-H2 Green $89.00

Tow Strap

Tow straps for your race car. Available in green and black, with TAKATA Logo embroidered.

With bendable stainless steel bolt-on hardware for up to 7/16" or max 12 mm bolt; capable of pulling over 1800 kg (4000 lbs)

Part Color Price Purchase
tr 78009-0 Black $42.00
tr 78009-H2 Green $42.00

Bolt In Bracket (B23C)

The B23C shares design with the B23B. Its main feature is that it is designed to be bent 90° in any direction while still retaining its strength. Dimensions are 3mm thick (uncoated) and 4mm thick (coated) - 61x81mm with a 13mm (1/2") hole. It can be sewn in, or wrapped with an LV7. 3" webbing must be folded at the edges for use with this bracket. FIA and SFI 16.1 approved.

Part Description Price Purchase
sr B23C Bendable 2" or 3" Bolt In Bracket $12.95

Bolt In Bracket (B24)

The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be bolted directly to a fl at surface and leave room for webbing wrapped into it. It can be sewn in, or wrapped with an LV4 (recommended), LV10 or LV11. FIA and SFI 16.1/16.5 approved. Cannot be used for a Lap Belt bolt-in bracket under SFI 16.5. 3" webbing must be folded at the edges for use with this bracket.

Part Homologation Price Purchase
sr B24.15.13 NC SFI/FIA $2.75

Bolts

Fairly straight forward, these are offered in the lengths shown.

7/16" bolts fit many factory seat belt locations, including European and Asian automobiles.

Part Bolt Size Thread Length Price Purchase
sr SG10 7/16 25mm $0.60
sr SG11 7/16 25mm with Shoulder $0.75
sr SG29 7/16 38mm $0.65
sr SG57 M8 25mm $0.50

Eye Bolts

These Eye bolts are designed to work perfectly with the B14 Snap On Brackets. Offered in lengths and thread pitches shown.

Part Thread Size Thread Length Price Purchase
sr SG22 7/16 38mm $4.00
sr SG23 7/16 22mm $3.50

3 Bar Slide (LV10)

Standard 3 Bar Slide for 2" webbing. Uses the simple 3 Bar Slide wrapping technique. Most commonly used for HANS specific shoulder belts or anti-sub straps.

If you are running in an SFI 16.5 series, you need the LV11NC.

Wrapping directions available Here.

Part Price Purchase
sr LV10.A $3.20

3 Bar Slide (LV7)

This 3 Bar Slide is designed to be used to wrap any 3" webbing to a harness bar, or to wrap any end fitting into a 3" piece of webbing. This is the bracket found on all 3" shoulder belts.

Uses the simple 3 Bar Wrapping technique. If you are in an SFI 16.5 series, be sure to select the LV7NC option.

Wrapping directions available Here.

Part Price Purchase
sr LV7 $4.00

Bendable Snap On Kit

This kit is to be used in conjunction with the Snap-On end fittings on Takata Harnesses. Use this bracket to bolt into a hard to reach place in your car, then snap the harness on to it.

Brackets are designed to be bent up to 90° in either direction. Do not bend back and forth repeatedly, as this will weaken the metal and could result in unsafe conditions.

Part Description Price Purchase
tr 01324kit Bendable Snap-on Kit $14.95

Reinforcement Plates

Reinforcing a harness mout point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.

Available in 3 different thread pitch/sizes.

Part Pitch/Size Price Purchase
sr SG39 Standard $4.50
sr SG54 M8 $6.50
sr SG55 M10 $6.50

FD Wallet

  • Manufactured by Harvey's in the USA
  • Made out of exclusive Takata Green Webbing
  • Harveys interior lining
  • Guaranteed "Tough for Life"
  • Plastic ID Slot, four credit card slots, one money slot
  • Size: Open 9" (L) x 3.5" (H) Folded 4.5"(L) x 3.5" (H) Inch

Takata and FD have teamed up to create one of the most distinctive wallets on the market today. Hand woven out of Takata Green seatbelt webbing, this wallet turns heads wherever it goes. The interior accommodates a clear ID window, four credit cards and a money slot. Expect nothing but the best quality, as it's manufactured by Harvey's, a premier company that deals exclusively with seatbelt products.

Please note: We only ship to North America. For all international orders, please visit Takata Racing Merchandise Store.

USPS Shipping is included in the price of this item

Choose UPS Ground during checkout and we will deduct the freight from your order. If you order other products, normal shipping rates will apply.

Part Color Price Purchase
tk fd-wallet-m-green Green $59.99